E
37
RS-232C command table
How to read the command table
Command: Commandeld(Seepage32.)
Direction: WWhenthe“Parameter”issetintheparametereld(seepage32),thecommandfunctionsasdescribed
under“Control/ResponseContents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?”or“???+”
(repeatercontrol)intheparametereld(seepage32).
Parameter: Parametereld(Seepage32.)
Reply: Response(Returnedvalue)
*1:
“●”
indicatesacommandwhichcanbeusedinpowerstandbymoderegardlessoftheSTANDBYMODE
setting.
 “○”indicatesacommandwhichcanalsobeusedinpowerstandbymodewhenSTANDBYMODEissetto
STANDARD.
“–”indicatesacommandwhichcannotbeusedinpowerstandbymoderegardlessoftheSTANDBYMODEsetting.
*2: PN-ZB02(optional)limitations
 (A)WhenPN-ZB02(optional)isnotattached,(B)WhenPN-ZB02(optional)isattached.
 ○:Thecommandcanbeused.
-:Error(ERR)

Power control/Input mode selection

Function
Command Direction
Parameter Reply Control/Response contents *1
*2
(A) (B)
POWERCONTROL POWR W 0 Switches to standby mode.
● ○ ○
1Returns from standby mode.
R0Standby mode
1Normal mode
2Input signal waiting mode
INPUTMODESELECTION INPS W 0 Togglechangeforinputmode.TerminalsnotselectedinINPUTSELECT
cannot be selected.
●
○ ○
1 PCDVI-D
“ERR”whenAVDVI-DisselectedforDVIofINPUTSELECT. -○
2 PCD-SUB ○ ○
3AVCOMPONENT
“ERR”whenPCRGBisselectedforBNCofINPUTSELECT. -○
4AVVIDEO - ○
6PCRGB
“ERR”whenAVCOMPONENTisselectedforBNCofINPUTSELECT. -○
7 AVDVI-D
“ERR”whenPCDVI-DisselectedforDVIofINPUTSELECT. -○
8AVS-VIDEO - ○
9 AVHDMI
“ERR”whenPCHDMIisselectedforHDMIofINPUTSELECT. ○ ○
10 PCHDMI
“ERR”whenAVHDMIisselectedforHDMIofINPUTSELECT. ○ ○
R1 PCDVI-D
● ○ ○
2 PCD-SUB
3AVCOMPONENT
4AVVIDEO
6PCRGB
7 AVDVI-D
8AVS-VIDEO
9 AVHDMI
10 PCHDMI
Controlling the Monitor with a PC (RS-232C)