BEFORE OPERATING

Getting Started

Step

Procedure

Pad Order

 

Display

 

Ensure the oven door is closed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Plug the oven into a power point and switch

 

 

 

 

 

 

 

 

 

on the power.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flashing

eights

 

 

 

 

 

 

 

 

 

 

 

 

Press the STOP/CLEAR pad so that the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

oven beeps.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only the dots will remain.

 

 

 

 

 

 

 

 

 

 

 

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step

Procedure

 

Pad Order

 

 

Display

1

Open the door and press the TIMER/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOCK pad.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Enter the correct time of day (hours) by

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing the TIME pads.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

x 1

x 1

 

 

 

 

 

Press the TIMER/ CLOCK pad again

3

Enter the correct time of day (minutes) by

4 pressing the TIME pads.

x 3

x 4

Press the TIMER/ CLOCK pad again.

5

This is a 12 hour clock.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

6

Page 7
Image 7
Sharp R-140D Before Operating, Getting Started, Clock Setting, Stop/Clear, To Cancel a Programme During Cooking