Sharp R-231F Care And Cleaning, Service Call Check, Specifications, Exterior, Door, Control Panel

Models: R-231F

1 21
Download 21 pages 3.34 Kb
Page 21
Image 21
CARE AND CLEANING

CARE AND CLEANING

Disconnect the power supply cord before cleaning or leave the door open to inactivate the oven during cleaning.

CLEAN THE OVEN AT REGULAR INTERVALS - Keep the oven clean, or it could lead to deterioration of the surface. This could adversely affect the life of the appliance and possibly result in a hazardous situation.

Exterior:

The outside may be cleaned with mild soap and warm water, wipe clean with a damp cloth. Avoid the use of harsh abrasive cleaners.

Door:

Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to remove any spills or spatters. Do not use abrasive cleaner.

Control Panel:

Wipe the panel with a cloth dampened slightly with water only.

Do not scrub or use any sort of chemical cleaners. Avoid the use of excess water.

Interior walls:

To clean the interior surfaces, wipe with a soft cloth and warm water for hygienic reasons. After use wipe the waveguide cover in the oven with a soft damp cloth to remove any food splashes. Built-up splashes may overheat and begin to smoke or catch fire. Do not remove the waveguide cover. DO NOT USE A COMMERCIAL OVEN CLEANER, ABRASIVE OR HARSH CLEANERS AND SCOURING PADS ON ANY PART OF YOUR MICROWAVE OVEN. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF YOUR OVEN.

Avoid using excess water. After cleaning the oven, ensure any water is removed with a soft cloth.

Turntable/Roller Stay:

Wash with mild soapy water and dry thoroughly.

SERVICE CALL CHECK

Please check the following before calling for service:

 

1.

Does the display light?

YES _______ NO _______

2.

When the door is opened, does the oven lamp come on?

YES _______ NO _______

3.Place one cup of water (approx. 250 ml) in a glass measure in the oven and close the door securely. Oven lamp should go off if door is closed properly. Press the INSTANT COOK/START pad once.

A. Does the oven lamp light?

YES _______ NO _______

B. Does the cooling fan work?

YES _______ NO _______

(Put your hand over the rear ventilation openings.)

 

C. Does the turntable rotate?

YES _______ NO _______

(The turntable can rotate clockwise or anticlockwise. This is quite normal.)

D. After one minute, did an audible signal sound and COOK

 

indicator go off?

YES _______ NO _______

E. Is the water inside the oven hot?

YES _______ NO _______

If “NO” is the answer to any of the above questions, please check your wall socket and the fuse in your meter box. If both the wall socket and the fuse are functioning properly, CONTACT YOUR NEAREST SERVICE CENTRE APPROVED BY SHARP.

NOTE: 1. If time in the display is counting down rapidly, check Demonstration Mode. (See page E-18 for detail.)

2.If you cook the food over 20 minutes on 100% power, the microwave power will be automatically reduced to avoid overheating.

SPECIFICATIONS

AC Line Voltage:

Refer to the rating plate.

AC Power Required:

1.21kW

Output Power:

800W*(IEC test procedure)

Microwave Frequency:

2450 MHz**(Class B / Group 2)

Outside Dimensions:

460 mm (W) x 275 mm (H) x 353 mm (D)

Cavity Dimensions:

322 mm (W) x 212 mm (H) x 336 mm (D)

Cooking Uniformity:

Turntable (ø295 mm tray) system

Weight:

Approx. 12kg

*This measurement is based on the International Electrotechnical Commission's standardized method for measuring output power.

**This is the classification of ISM (lndustrial, Scientific and Medical) equipment described in the lnternational Standard CISPR11.

E-19

Page 21
Image 21
Sharp R-231F Care And Cleaning, Service Call Check, Specifications, Exterior, Door, Control Panel, Interior walls