INSTALLATION INSTRUCTIONS
|
|
IMPORTANT: This
The cabinet or wall opening must be within the following dimensions:
HEIGHT | 19" to 19 1/8" (482 mm - 486 mm) |
WIDTH | 28" to 28 1/4" (710 mm - 719 mm) |
DEPTH | 23 1/4" minimum (509.5 mm minimum) |
The completed
HEIGHT | 19 1/2" (495mm) |
WIDTH | 30" (762mm) |
NOTE: The bottom of the
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION! The electrical requirements for this oven are 120 volts, 15 amps. The oven has a
PROVIDED PARTS
RECTIFIER
PLATE L
EXHAUST DUCT
BACKEXHAUST
DUCT UPPER
DIVIDE PLATE L | DIVIDE PLATE R | EXHAUST | EXHAUST |
|
| DUCT LEFT | DUCT |
|
|
| RIGHT |
EXHAUST DUCT BOTTOM
REAR SPACER | FRAME | ||
ASSEMBLY | |||
| |||
SCREW (A) - SHORT | SCREW (B) - MIDDLE | SCREW (C) - LONG |
*For walls other than wood, you may need screws appropriate for that wall to install the frame.
*Be sure to DISCONNECT THE PLUG of the oven from the electrical outlet before installing the oven and kit.
*Because the kits are metal, due caution should be used in handling and installation to avoid the possibility of injury.
1
PART NAME | Q'TY | |
|
| |
EXHAUST DUCT BACK | 1 | |
| ||
EXHAUST DUCT UPPER | 1 | |
| ||
DIVIDE PLATE L | 1 | |
| ||
DIVIDE PLATE R | 1 | |
| ||
RECTIFIER PLATE L | 1 | |
| ||
EXHAUST DUCT LEFT | 1 | |
| ||
EXHAUST DUCT RIGHT | 1 | |
| ||
EXHAUST DUCT BOTTOM | 1 | |
| ||
FRAME ASSEMBLY | 1 | |
| ||
SCREW(A) | 23 | |
XHTS740P08000 | ||
| ||
SCREW(B) | 2 | |
XMMS841P13000 | ||
| ||
SCREW(C) | 4 | |
XMSS827P25000 | ||
| ||
REAR SPACER | 1 | |
PSPAFA003WRWZ | ||
| ||
CUSHION 1 5/8" x 16", | 2 | |
15 mm x 405 mm | ||
| ||
CUSHION 2 1/4" x 24 3/8", | 1 | |
5 mm x 618 mm | ||
| ||
CUSHION 3 1 1/8" x 27 1/8", |
| |
30 mm x 689 mm | 1 | |
| ||
CUSHION 4 1/4" x 12", | 1 | |
5 mm x 305 mm | ||
| ||
CUSHION 5 1/4" x 15", |
| |
5 mm x 382 mm | 1 | |
|
Printed in Thailand