18
SD-EX200
03/3/14 SD-EX200_sec.fm TINSZ0523AWZZ
CD Playback
- Advanced CD Playback -
Advanced CD Playback (continued)
Direct play
By using the direct buttons , the desired tracks can be played.
Notes:
zAfter pressing the " 10" butt on, the two digit s must be entered within 5 seconds of
each other.
zIt is not possible to enter a track number higher than the total tracks of the CD.
zYou cannot select a trac k with the direct buttons while in random or program play.
Switching the time display
Each time the TIME button on the remote control is pressed during playback, the dis-
play will change.
Repeat or random pla y
You can select one of the CD playback mode; "Repeat play", "Random play" and
"Normal play".
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat pla y-
back.
Notes:
zDuring program operation, the random mode cannot be selected by the PLAY
MODE button.
zAfter using repeat play, be sure to press the button. Otherwise, the disc will play
continuously.
zThe random play will stop automatically when all tracks are played once. (The
same track will not be pla yed back twice. )
zIn random pla y, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal play mode.
Press the direct buttons to select the desired track.
The direct buttons will allow you to select and play any track from 1 to 10 automati-
cally.
To select a track between 11 and 99:
Press the " 10" button followed by the two digits of the track number.
For example, to choose 28
1Press the " 10" button.
2Press the "2" button.
3Press the "8" button.
The elapsed playing time for the current track will
be displayed.
The remaining playing time for the current track
will be displayed.
1When in the CD mode, press the PLAY MODE bu tton repeatedly to
select the playback mode.
2Press the button to start playback.