E-53
ENGLISH
SD-PX2
Advanced Features
- Mounting the unit on the wall -
Mounting the unit on the wall
Attaching the main unit bracket to the unit
1Route all connection cables through the main unit bracket.
2Attach the main unit bracket to the unit.
zFix them securely with the supplied 2 screws.
zDo not use other screws. The unit may fall or break.
Mounting the main unit bracket on the wall
VESA (*) compliant fittings (commercially available) can be attached to the
main unit bracket.
A wall bracket and adaptor not supplied, but can be purchased.
Note:
Types of fittings:
Fittings must satisfy the foll owing.
zCompatible with the VESA standard.
zHav e a gap of 3.973" (100 mm) 3.973" (100 mm) between the screw holes on the
section to be attached.
zSturdy and stable to prevent fall or breakage.
How to attach the main unit bracket
zThere are four VESA (*) screw holes on the main unit bracket. You can use com-
mercially avai lable fittings for mounting.
zFollow the method recommended by the bracket manufacturer.
Main unit bracket
Place the main unit on a cushion or a
soft cloth to avoid damage.
Supplied screw
(*) VESA (Video Electronics Standards Association) is an organization to promote
the standardization of digital imaging device for PCs.
3.973" (100 mm)
3.973"
(100 mm)