Sharp SJ-TD555S Care And Cleaning, How to remove the water tank, Switching off your refrigerator

CARE AND CLEANING

WARNING

■Unplug the refrigerator first to prevent electric shock.

■Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.

IMPORTANT

To prevent cracking on inside surfaces and plastic components, follow these tips:

•Wipe any food oils adhered to plastic components.

•Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water).

•If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result.

•Wipe any spills from the refrigerator immediately, as acid or alkaline in the food can cause cracking and staining of plastic parts.

1 Remove the accessories e.g. shelves from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry.

(Only fruit and vegetable shelf is not removable.)

2 Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water.

3 Wipe the exterior with a soft cloth each time it is soiled. 4 Clean the magnetic door seal with a toothbrush and

warm soapy dishwashing water.

NOTE

•Do not use hot water, household cleaning powders, creams or spray-on cleaning products, or any other cleaning products such as mineral turpentine, methylated spirits, thinners, petrol etc. These may damage your refrigerator and may void any warranty.

•If the power supply is disconnected, please wait for at least 5 minutes before re-connecting power.

•The glass shelves weigh approximately 3 kg each. Hold firmly when removing from the cabinet or carrying.

•Do not drop objects inside the refrigerator or strike the inner wall. This may cause the inner surface to crack.

How to remove the water tank

(Cleaning once a month is recommended.)

1 Push the lever and let out all water in the water tank.

2 Remove the pipe cover.

Disconnect the both ends of the joint pipe.

Joint pipe

Pipe cover

To attach

Water tank

Door

3 Remove the water tank from the door.

4 Remove the cover and take out the mesh filter.

Cover	Mesh
	filter
To attach
1	2

NOTE

Ensure that all parts are reassembled. Incorrect assembly may cause water leakage.

Switching off your refrigerator

If the refrigerator needs to be switched off for an extended period, the following steps should be taken to reduce the symptom of mould:

1.Remove all food.

2.Remove the power plug from the power point.

3.Clean and dry the interior thoroughly.

4.Ensure that all the doors are wedged open slightly for air circulation.

5