Sharp SX68NF8 Watching TV, Watching a TV programme, Simple operations for watching a TV programme

P r i n t e l l i g e n c e ( M ) S d n . B h d

Watching TV

Watching a TV programme

TV Set (Bottom)

POWER

ON TIMER SAVE

Power indicator

TV Set (Top)

MENU/PRESETCH

CH

CH

POWER TV/VIDEO

SAVE

1

1	2	3
AV MODE
4	5	6	5
SURROUND
7	8	9
MPX
	0
A B	C	D
	CH		CH
	CH
			CH
NORMAL		MENU

TV/TEXT

Simple operations for watching a TV programme

1 Turn on power.

•When the power indicator is off, press .

•When the power indicator lights up red, press on the remote control. The power indicator changes to green and a picture appears.

2 Select channel.
	With	CH	/ CH
	• Press	CH	and channels change as shown below.
	1 / 2 / ... / 98 / 99 / AV1 (or SAV1) / AV2 (or COMPONENT) /
	AV3 (or SAV3) / 0 / 1 / 2 ...
	• Press	CH	and channels change as shown below.
	1 / 0 / AV3 (or SAV3) / AV2 (or COMPONENT) / AV1 (or SAV1) /
99 / 98 / ... / 2 / 1 / 0 ...

With the number buttons (on remote control)

• To select a one-digit channel, such as 5, press				5	.
If “5-” is indicated, press			to select one-digit input, and then
press	5	again.

•To select a two-digit channel, such as 15, press to select

the two-digit input. Press 1 , and then press 5 .

--

1-

15

PAL

3 Adjust volume using	/
.

•The number of oval blocks “”

indicates the volume level.
The volume bar disappears
approximately three seconds after	VOLUME	10
the volume has been adjusted.

• When the power indicator lights up red, either CH	/ CH	on the TV can be pressed to turn on
the power.

•The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for channels tuned using fine tuning.

•When the power indicator lights up red, the TV is in Standby mode and power is still supplied to the TV.

If you will not watch TV for a while, turn off the main power by pressing on the TV set. Also, if you will not be at home for a considerable length of time, unplug the cord from the outlet.

•The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 (or SAV3) input channels cannot be selected using

CH / CH on the remote control. Use TV/VIDEO to select these channel.

•Channels that have been skipped cannot be selected. See 15 .

•The on-screen displays in this manual may differ from their actual appearance.

E 7

SX68NF8(06-10) 7 7/11/02, 2:03 PM

D i m e n s i o n : 1 7 6 x 2 5 0 m m