Electrical Outlet
Suggested electrical
outlet location*
5" (127 mm)
4" 
(101.6 mm)
Figure 7
The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. or more protected electrical supply. It is recommended that a separate circuit serving only this appliance be provided.
The drawer is equipped with a
Note: If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person.
*Can also be installed using an electrical outlet in an adjacent cabinet within the area where the provided electrical cord can reach. Always check electrical codes for requirements.
Grounding Instructions
This appliance must be grounded. The Microwave Drawer is equipped with a cord having a grounding wire with a grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes
and ordinances. In the event of 
an electrical short circuit,
grounding reduces risk of electric shock by providing an
escape wire for the electric current.
– Improper use of the grounding plug can result
in a risk of electric shock. Do not use an extension cord. If
the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
Drawer Installation
Figure 8A
1. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet.
2. Carefully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall.
3.Slide the drawer all the way until the
mounting flange is flush with the face of the cabinet. See
Figure 8A.
4.Open the drawer. Using the 4 holes on the drawer as a template, pre drill the cabinet using a 1/16" bit. See Figure 8A.
5.Secure the drawer with the 4 screws supplied. See Figure 8B.
Model and serial number location
The name plate includes model and serial number. Open the Microwave Drawer fully. The label is beyond the back wall of the microwave cavity facing up from the flat surface.
Care, cleaning and maintenance
Refer to the Operation Manual for cleaning instructions.
Before you call for service
Read the BEFORE YOU CALL and operating instruction sections in your Operation Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance.
Refer to the warranty in your Operation Manual for Sharp’s service number and address. Please call or write if you have inquiries about your microwave product and/or need to order parts.
SHARP ELECTRONICS OF CANADA LTD
335 Britannia Road East • Mississauga, Ontario • L4Z 1W9
E 4
