Sharp X2-30ES manual USE These Single Digit to

one seconds to 99 minutes and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both minutes and seconds. For example, to set 20 minutes, enter 2,0,0,0.

3.If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level. You can set the power level from 1 to 9.

4.Touch START to start cooking.

USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad	% of Power
9	90%
8	80%
7	70%
6	60%
5	50%
4	40%
3	30%
2	20%
1	10%

B. Two-stage Cooking

Some recipes require different stages of cooking at different temperatures.

1.SET STAGE 1:

Follow steps 1 and 2 in “One-stage Cooking”.

DO NOT TOUCH START PAD.

2.SET STAGE 2:

Touch MEMO pad then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for second stage.)

3.Touch START pad.

NOTE:

·The respective lights will come on to indicate which stage the oven is operating in. After total time has elapsed, 3 beeps sound. After a cooking or defrosting program has completed, the oven will automatically continue to sound three beeps every two minutes until the door is opened or the STOP pad is touched.

START DELAY

Suppose you want to set the oven to start-up at 2 o’clock.

Step : 1. Touch START DELAY pad.

2.Touch numeral pads 2.0.0.

3.Set the cooking programs. 4.Touch START pad.

NOTE:

Be sure the time of day clock is set at the correct time before programming START DELAY.

EXPRESS

Use this feature to program the oven for 4 popular microwave timings.

With each touch of the EXPRESS pad you can program the oven for :

15 seconds ………TOUCH ONCE

30 seconds……….TOUCH TWICE

1minute……….TOUCH 3 TIMES

2minutes………TOUCH 4 TIMES The oven will operate at HIGH power (100% power output) for EXPRESS cooking program. Suppose you want to set the oven to cook for 1

8