Sharp XE-A403 10sA, 15sA, f r, R, Commission rate, 3Commission Rate Programming, 4Miscellaneous Key Programming

*: Item:			Selection:	Entry:
	A	Commission group number		0-2 (0: Non commission)
	B	PLU/subdepartment selection	Subdepartment	0
			PLU	1

Key operation example Print

1 p

10sA

Commission group PLU/subdept.

When you program the last PLU code, the programming sequence will be complete with a press of the skey.

3Commission Rate Programming

Based on each clerk’s sales total of each commission group and the corresponding commission rate, the commission amounts are calculated, which is printed on clerk reports.

Commission rate

s	28	@	Commission	@	Commission rate	s	A
			number (1 or 2)		(0.00 - 999.99)
	Key operation example				Print

s28 @

1 @

15sA

You must use a decimal point when setting a fractional rate.

4Miscellaneous Key Programming

The cash register provides miscellaneous keys such as %, &, -, f, r, R, V, t, C, X, Yand A. While the cash register is pre-programmed so you can use these keys, you must set a currency conversion rate to use Vkey. You can also program these keys for more convenient use. Please refer to the data below for programming these keys. Factory setting is indicated with parentheses.

%, &

-

f r, R V

Percent rate (0.00%), tax status (non-taxable), sign (minus), item % and subtotal % entry* (both are allowed), percent rate limitation (100%)

Amount (0.00), tax status (non-taxable), sign (minus), item _and subtotal _entry* (both are allowed), entry digit limit (7 digits)

Not necessary to program Entry digit limit (9 digits)

Currency conversion rate (0.0000), currency conversion rate entry method - open or preset (both are enabled)

35