Changing the Lens
5 Insert the lens into the projector.
•As you insert the lens, look inside the window to make sure that the pin is in- serted into the hole of the lens mount.
Pin
Lens mount
6
7
Slide the lens fastener catch tab in the direction of “LOCK” until it stops.
•Be careful not to rotate the lens fastener ring too tight, as the lens fastener ring will be difficult to loosen the next time the lens is changed.
Replace the lens housing cover.
•If the lens housing cover is not secured to the projector, you will not be able to turn the power on.
Lens fastener catch tab
-10