Setting up the Projector Network Environment
5 Click“Internet Protocol (TCP/IP)”, and click the “Properties” button.
1
2
6 Confirm or change an IP address for the setup computer.
1Confirm and note the current IP ad- dress, Subnet mask and Default gateway.
Make sure to note the current IP ad- dress, Subnet mask and Default gate- way as you will be required to reset
them later.
2Set temporarily as follows :
IP address : 192.168.150.3
Subnet mask : 255.255.255.0
Default gateway : (Do not input any values.)
Note
•When “DHCP Client” is set to “OFF” on the projector:
IP address : 192.168.150.2
Subnet mask : 255.255.255.0
Default gateway : 0.0.0.0
7 After setting, click the “OK” but- ton, and then restart the com- puter.
After confirming or setting, proceed to “3. Setting up Network Connection for the Pro- jector”.
-21