Setting and Adjusting the
Projector (Settings & Adjustments)
Example: “Picture” screen display for INPUT 1
On these screens, you can make projector settings or adjustments.You can set or adjust the following items :
•Picture Mode
•CLR Temp
•Bright Boost
•Progressive (INPUT 3/4)
•Lamp Setting
•Resolution Setting
•Signal Type (INPUT 1/2)
•Video System (INPUT 3/4)
•Resize
•Auto Keystone [OFF][ON]
•OSD Display [OFF][ON]
•Background
•Setup Guide [OFF][ON]
•Projection Mode
•OSD Language
•Auto Search [OFF][ON]
•Auto Sync [OFF][ON]
•Auto Power Off [OFF][ON]
•System Sound [OFF][ON]
•Internal Speaker [OFF][ON]
•
•Fan Mode [Normal] [High]
•All Reset
Note
•If you click the “Refresh” button before the screen is displayed completely, an error mes- sage (“Server Busy Error”) will be displayed. Wait for a moment and then operate again.
•You cannot operate this page while the pro- jector is warming up.
•For details about each item, refer to the projector’s operation manual.
Controlling the Projector via LAN
Setting the Security
(Network – Security)
On this screen, you can make settings relating to security.
| Items | Description |
User Name | Setting of user name for | |
|
| security protection. |
|
|
|
Password | Setting of password for | |
|
| security protection. |
Accept IP | It is possible to set up to three | |
Address | IP addresses allowing connec- | |
|
| tion to the projector. |
| All IP | No limits are set to IP addresses |
| Addresses | connecting to the projector. |
| From only | For security improvement, only an |
| specific IP | IP address set by “Address |
| addresses | can be connected to the projector. |
Note
•User Name and Password can be up to 8 characters.
•You can input the characters below :
-15