Sharp XG-PH70X, XG-PH70X-N Auto Sync Adjustment, Checking the Input Signal, Computer Image Adjustment (“Fine Sync” menu), Description of Auto Sync Adjustment

Computer Image Adjustment (“Fine Sync” menu)

Checking the Input Signal

Menu operation Page 56

Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode

Note

•The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video.

•The projector will display the resolution when connecting the computer.

Auto Sync AdjustmentUsed to automatically adjust a computer image.

Menu operation Page 58

Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode

Description of Auto Sync Adjustment

Selectable items	Description
OFF	Auto Sync adjustment is not automati-
	cally performed.
	Auto Sync adjustment will occur when
Normal	the projector is turned on or when the
	input signals are switched, when
	connected to a computer.
High Speed	“Normal” takes more time than “High
	Speed” for more accurate Auto Sync
	adjustment.

Note

•Auto Sync adjustment is also performed by

pressing on the projector or on the remote control.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 68.)

•When is pressed while “Auto Sync” is “OFF” or “High Speed”, Auto Sync will be executed in “High Speed” mode. If the button is pressed again within one minute, Auto Sync will be ex- ecuted in “Normal” mode.

-70