Sharp XG-V10WU Watching DVD and Digital TV Images, For Better Sound

E-18
Setup & Connections
Watching DVD and Digital TV Images
1Connect each BNC connector of a component cable to the corresponding
BNC INPUT 2 terminals on the projector.
•BNC-RCA adaptors are needed for use with RCA type cables and sources.
2Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
3To use the built-in audio system, connect one end of an audio cable (sold
separately) to the AUDIO INPUT 2 terminal on the projector.
4Connect the other end to the audio output terminal on the DVD player or DTV
decorder.
When connecting this projector to a DVD player or DTV decoder, select
“Component” for “Signal Type” on the GUI menu. (See page 45.)
Connecting to a DVD player, DTV decoder and other component video
equipment using the 5 BNC Input
DTV decoder
or
DVD player
Amplifier
To audio input terminals
Audio cable (sold separately)
For Better Sound
Connecting to an amplifier and other audio components
CAUTION
•Always turn off the projector before connecting to audio components, in order
to protect both the projector and the components being connected.
•By using external audio components, the volume can be amplified for better sound.
•The AUDIO OUTPUT terminals allow you to output audio to audio components from the
selected AUDIO INPUT 1 to 5 terminals connected to audiovisual equipment.
Three BNC-RCA adaptors
(Sold separately)
CAUTION
•Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
3
2To analog component
output terminals
1
4 To audio output terminals
Component cable (sold separately)
e.g. Outputs for Inputs 4, 5
Audio cable
(sold separately)