E-53
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “OSD Display”, and then
press ©.
4Press ∂/ƒ to select the desired On-screen
Display.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
Projector Remote Control
1.2.3 4.5.6
1, 6
5
2, 3, 4
(GUI) On-screen Display
Setting the Video Signal (VIDEO menu only)
1.2.3 4.5.6

1, 6

5

2, 3, 4

Projector The video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode
if the selected system mode is not compatible with the
connected audiovisual equipment.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Video System”, and then
press ©.
4Press ∂/ƒ to select the desired video system
mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•When the system mode is set to “Auto”, you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
•AUTO cannot be set for PAL-M and PAL-N input signals.
Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-
M and PAL-N input signals.
(GUI) On-screen Display
MOUSE
ADJ.
Remote Control
MOUSE
ADJ.
DescriptionSelected item
Normal
Level A
Level B

Description of OSD Display

All On-screen Display are displayed.
INPUT, CUSTOM, FREEZE, ENLARGE, AUTO SYNC,
VOLUME, MUTE, BLACK SCREEN are not displayed.
All On-screen Display are not displayed (except warning
display (MENU, TOOLS, LENS, Power off, Temp., Lamp
etc.)).