Sharp XG-V10WU Protecting Important Settings with a Password

E-61
Useful Features &
Network Function
A password can be set by the user and used with the
keylock level to prevent adjustments to certain settings
on the GUI.
•When password is set, you need to enter the password to
use “Lamp Mode”, “PRJ Mode”, “Stack Setting”, “Keylock
Level”, “Set Inputs”, “RS-232C” and “Set ID No.” menus.
Setting the Password
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (2)”.
3Press ∂/ƒ to select “Password”, and then press
©.
4Enter the new password using ∂/ƒ to select the
desired number, and then press © to select the
next digit. Continue this procedure for the
remaining three digits, and then press ENTER.
5Enter the password again (“Reconfirm”) using
∂/ƒ/ß/©, and then press ENTER.
6To exit from the GUI, press MENU.
•After setting the password, be sure to write it down in a
secure location in case you can not remember it.
Changing the Password
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Follow steps 1 to 3 in “Setting the Password”
above.
2Enter the old password using ∂/ƒ/ß/©, and then
press ENTER.
3Enter the new password using ∂/ƒ/ß/©, and
then press ENTER.
4Enter the password again (“Reconfirm”) using
∂/ƒ/ß/©, and then press ENTER.
Protecting Important Settings with a Password
1.2.3 4.5.6
1, 6
2, 3
4, 5
Projector Remote Control
(GUI) On-screen Display
MOUSE ADJ.
Setting the Password
Changing the Password
MOUSE ADJ.