11
XL-E80
Preparation for Use
!Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
"Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
"Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
"Do not stand or sit on the speakers. You may be injured.
"Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
"Do not let the bare speaker wires touch each other.
Placing the speaker system:
There is no distinction between the right and the left speakers.
!Connecting the AC power cord
After checking all the connections have been made correctly, con-
nect the AC power cord to the AC power input jack, then plug the AC
power cord of this unit into the AC outlet.
Notes:
"Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
"Never use a power cord other than the one supplied. Otherwise,
a malfunction or an accident may occur.
!To turn the power on
Incorrect
Speaker grilles are removable:
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
Press the ON/STAND-BY button to
turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.

AC outlet

(AC 120 V, 60 Hz)