Sharp XL-S10 Listening to the memorized station

03/12/18 XL-S10(U)2.fm

XL-S10

TINSEA018SJZZ

Radio

Listening to the memorized station

"Memorizing a station

You can store 40 AM and FM stations in memory and recall them at

the push of a button. (Preset tuning)

Note:

The backup function protects the memorized stations for a few

hours should there be a power failure or the AC power cord get dis-

connected.

"To recall a memorized station

"To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre-

set memory scan)

"To clear a memorized station

1Perform steps 1 - 3 in "Listening to the radio" on page 18.

2Press the MEMORY/SET

(MEMORY) button to enter the

preset tuning saving mode.

3Within 5 seconds, press the

PRESET ( or ) button to se-

lect the preset channel num-

ber.

Store the stations in memory, in order, starting with preset

channel 1.

4Within 5 seconds, press the

MEMORY/SET (MEMORY)

button to store that station in

memory.

If the "MEMORY" and preset number indicators go out before

the station is memorized, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a pre-

set station.

When a new station is stored in memory, the station previously

memorized will be erased.

Press the PRESET ( or ) button for less than 0.5 seconds to

select the desired station.

Preset channel Frequency and frequency band

1Press the PRESET ( or ) button for more than 0.5 sec-

onds.

The preset number will flash and the programmed stations will

be tuned in sequentially, for 5 seconds each.

2Press the PRESET ( or ) button again when the desired

station is located.

1 Recall the memorized station.

2 While it is displayed, press the MEMO-

RY/SET (MEMORY) button.

3 Within 5 seconds, press the CLEAR but-

ton on the remote control.