Sharp XL-S10 Timer and sleep operation (continued)

03/12/18 XL-S10(U)3.fm

XL-S10

TINSEA018SJZZ

Advanced Features

Timer and sleep operation (continued)

To reset or change the timer setting:

Perform "Timer playback" from the beginning.

"Sleep operation

To cancel the sleep operation:

Press the ON/STAND-BY button while "SLEEP" is indicated.

To cancel the sleep operation without setting the system to the

stand-by mode, press the SLEEP button until "OFF" appears on the

display.

To confirm the remaining sleep time:

Press the SLEEP button once while the sleep timer is set.

The remaining sleep time is displayed for about 5 seconds.

"To use timer and sleep operation together

Example: To fall asleep and wake up to the same radio station

You can play back the same source only (the function cannot be

switched).

7When the preset time is reached, playback will start.

The volume will increase gradually until it reaches the volume

you were listening at before your system enters the timer stand-

by mode.

8The unit will enter the stand-by mode one hour after the

timer playback starts. However, when CD playing time is

one hour or less, it will enter the stand-by mode after com-

pleting playback.

1Play back the desired sound source.

2Press the SLEEP button.

To change the sleep time:

Press the SLEEP button repeatedly to select the desired sleep

time. The time will decrease as follows.

The amount of sleep time can also be changed while in the

sleep mode.

3Your system will enter the power stand-by mode automat-

ically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op-

eration finishes.

3:00 2:00

OFF 15 30

1:30

105

1:00

1Set the sleep time (steps 1 - 2, page 24).

2While the sleep timer is set, set the timer playback start

time (steps 4 - 6, page 23).

Sleep timer setting

Timer playback setting

Timer playback

start time

5 minutes - 3 hours

Sleep operation will

automatically stop.