System connections

Precautions

Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4”) of free space along the sides, top and back of the equipment.

10 cm (4”)

10 cm (4”)

 

10 cm (4”)

 

10 cm (4”)

Use the unit on a firm, level surface free from vibration.

Place the speakers at least 30 cm (12”) away from any CRT TV to avoid colour variations across the TV screen. If the variations persist, move the speakers further away from the TV. LCD TV is not prone to such variation.

Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.

Do not place anything on top of the unit.

Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures.

If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.

In case of an electrical storm, unplug the unit for safety.

Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.

The AC power plug is used as a disconnect device and shall always remain readily operable.

Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Attention should be drawn to the environmental aspects of battery disposal.

This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).

The apparatus is designed for use in moderate climates.

Speaker connection

Fully insert the speaker wires into the speaker terminals.

Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.

Do not make a mistake when connecting the right and left speakers. The right speaker is the one on the right side when you face the unit.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

Do not stand or sit on the speakers. You may be injured.

E-

Page 3
Image 3
Sharp XL-UH06H operation manual System connections, Precautions, Speaker connection