System connections (continued)
Make sure to unplug the AC power lead before making any connections.
FM aerial
The spec label (*)
10 21W
The spec label illustration may be different from the actual label used.
(*)Label is located at the bottom of the unit.
Wall socket | Right speaker | Left speaker |
(AC 220 - 240 V ~ 50/60 Hz) |
Remote control - battery installation
Note:
Before using remote control, please remove plastic shield at battery holder.
1While pushing the locking tab towards the centre of the remote control, slide out the battery holder.
Back of remote
Plasticcontrol
Remote shield control
Battery holder | Locking tab |
2Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control.
Battery holder | Positive (+) |
| side up |
Polarity
(+) symbol
Battery type Locking tab
Precautions for battery use:
Remove the battery if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.
Caution:
●Do not use rechargeable battery
●Danger of explosion if battery is incorrectly replaced.
●Replace only with the same or equivalent type.
●Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
●Installing the battery incorrectly may cause the unit to malfunction.
Notes concerning use:
●Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase “CR 2025”, coin lithium battery.
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock, and vibrations.
E-
