-18

Setting Up the Projector

Projecting a Reversed Image

Projection from behind the Screen

■Place a translucent screen between the projector and the audience.
■Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 52.)

Projection Using a Mirror

■Place a mirror (normal flat type) in front of the lens.
■When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page 52.)
■When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page 52.)
Info
•When using a mirror, ensure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.

Ceiling-mount Setup

■It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
■Before mounting the projector, contact your nearest Authorized
SharpVision Service Center or Dealer to obtain the recommended
ceiling-mount bracket (commercially available). (AN-CM270 ceil-
ing-mount bracket, AN-EP101B extension tube for AN-CM270.)
■Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See
page 52 for use of this function.
Translucent screen
Audience
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror