Quick Start
temperature samplings at roughly 30-second intervals from the three remote units. If no signal is received, blanks will be displayed. Press the main unit’s CHANNEL and MEMORY simultaneously to enforce another search, or to synchronize the transmission and reception of the remote and main units if you find discrepancies in the temperatures shown.
3.To view one remote unit’s temperature display, press CHAN- NEL to change from one to the next.
4.To scan all three remote units with one touch, press and hold CHANNEL for about 2 seconds and view all three tempera- tures for 5 seconds each. Press CHANNEL again to stop the scanning function.
5.To display the maximum and minimum temperatures stored in each remote unit’s memory, press CHANNEL for the desired channel, then press MEMORY to rotate through the maximum, minimum and current temperatures.
6.To clear the memory of a particular channel, press CHANNEL to locate the desired channel, then press CLEAR to erase the stored maximum and minimum temperatures. (Now, if you press MEMORY, these settings will have the same value as the current temperature until different readings are recorded.)
