Sherwood BDP-904 manual Setting the Audio, PCM Downsampling, Digital Output, Dynamic Range Control

BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 31

SETTING THE AUDIO

•For how to select the setting items and options, refer to “System Settings” on page 28.

•Settings with* are the default.

Setting items	Options
	96 kHz :
	Outputs audio signals at 96 kHz sampling frequency.
PCM Downsampling	48 kHz* :
	Outputs audio signals at 48 kHz sampling frequency.
Set the maximum sampling frequency for the
PCM signals output from the OPTICAL/	■Note :
COAXIAL DIGITAL OUTs.
	• When the A/V amplifier does not support LPCM at higher sampling
	frequency, no sound or a loud sound may result. Should this happen, set it
	to lower sampling frequency.
Digital Output	PCM Stereo*/Bitstream HD/Bitstream Legacy/Bitstream Mixed/PCM 5.1 /
Set the audio format for the digital audio	PCM 7.1.
signals output from the HDMI OUT or the
OPTICAL/COAXIAL DIGITAL OUTs	• For details on the digital audio signals output from the HDMI OUT or the
depending on what audio format A/V amplifier	OPTICAL/COAXIAL DIGITAL OUTs depending on Digital Output settings,
supports.	refer to “Audio output signals” on page 10.
	On :
Dynamic Range Control	Turns on the dynamic range compression to hear low sounds easier.
Set whether to compress the dynamic range	Off* :
between the loudest and softest sounds when	Turns it off.
Dolby Digital, Dolby Digital Plus or Dolby	Auto :
TrueHD audio is played back.	When Dolby TrueHD audio is played back, the dynamic range is automatically
	adjusted.

ENGLISH

31