Sherwood D-480 Notes On Cassette Tape, Cleaning The Head Section, Demagnetizing The Head, English

Models: D-480

1 20
Download 20 pages 25.56 Kb
Page 17
Image 17
NOTES ON CASSETTE TAPE

Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang and Olufsen.

”Dolby”, the double-D symbol, and “HX Pro” are trademarks of Dolby Laboratories Licensing Corporation.

NOTES ON CASSETTE TAPE

Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan.

After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recored on accidently.

For side B

For side A

 

 

To rerecord after tabs have been removed, cover with adhesive tape.

Do not store the tapes in direct sunlight or near equipment that generates heat. Keep the tapes away from any magnetic fields.

Do not touch the tape surface. Store the tapes in their cases after use. Dust can cause contamination of the heads resulting in noise.

CLEANING THE HEAD SECTION

Clean the head section about every 10 hours of use. Use a commercially available head cleaning tape.

For better recordings, you should clean the head section before every recording.

After cleaning the head section, do not load a tape until the cleared section is completely dry.

DEMAGNETIZING THE HEAD

Demagnetize the recording/playback head about every 10 hours of use with a commercially avaiable demagnetizer so that the magnetized head may not cause the sound to be deteriorated.

ENGLISH

17

Page 17
Image 17
Sherwood D-480 operating instructions Notes On Cassette Tape, Cleaning The Head Section, Demagnetizing The Head, English