LISTENING TO RADIO BROADCASTS
Auto tuning
1. Select the tuner and then the desired band.
• Each time this button is pressed, the tuner is automatically selected and the band is changed as follows :
→ FM ST → FM MONO → AM
• When the FM stereo broadcast is tuned, the FM mode changes as follows:
� Stereo mode : "ST" lights up. Mono mode : "ST" turns off. �
• When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode ("ST" turns off) to reduce the noise, then FM broadcasts are reproduced in monaural sound.
2. Select the tuning mode.
• Each time this button is pressed, the mode changes as follows:
� Tuning mode : "PRESET" turns off. Preset mode : "PRESET" lights up. �
3. Press the TUNING/PRESET UP (▲/+) or DOWN
• The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply repeat this operation.
• Weak stations are skipped during auto tuning.
15
