Introduction
UNPACKING AND INSTALLATION
Congratulations on Your Purchase!
Your new
Please unpack your unit carefully. We recommend that you save the carton and packing material. they will be helpful if you ever need to move your unit and may be required if you ever need to return it for service. Your unit is designed to be placed in an upright position and it is important to allow at least four inches of space behind your unit for adequate ventilation and cabling convenlence.
To avoid interference with the TV picture, place this unit apart from the TV set.
To avoid damage, never place the unit near radiators, in front of heating vents, in direct sunlight, or in excessively humid or dusty locations. Connect your complementary components as illustrated in the following section.
CAUTION :TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO
This symbol in intended to alert the user to the presence of uninsulated “dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol in intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Caution:Do not block ventilation openings and fan.
READ THIS BEFORE OPERATING YOUR UNIT
FOR U.S.A. AND CANADA·······················120V
FOR YOUR SAFETY
Units shipped to the U.S.A. and Canada are designde for operation in 120V AC only.
Observe all, safety precaution with use of a polarized AC plug.
However, some products may be supplied with a nonpolarized plug.
CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully Insert.
ATTENTION : Pour eviter les choc electriques, introduire la lame la plug large de la borne correspondante de la prise et poussre jusqu’au fond.
FOR EUROPE AND AUSTRALIA ·········230V/240V
FOR YOUR SAFETY
Units shipped to Australia are designed for operation on 240V AC only.
To ensure safe operation, the
Improper extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily dose not imply that the power point is earthed and that the installation is completely safe.
For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician.
All units are suitable for use on supplies
1