Sherwood ST-3108, ST-3103 manual System Connections

System Connections

·This ST-3103/3108 is designed to use together with Sherwood’s products.(amplifier/DVD receiver/etc) Doing so will allow you to operate easily and conveniently.

In case of connecting other amplifier or receiver to this unit, contact your dealer or our service organization.

·For proper connections, refer to the operating instructions of the component connected.

Notes :

·Do not connect this unit to the wall AC outlet when plugging and unplugging connection cords.

·Be sure to connect the RCA cord to Audio Input jack of active subwoofer when making connections.

·Never short circuit the + and - speaker cords.

·Be sure to connect speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -).

·Be sure to use the main speakers with the impedance of over 6Ω.

·When this unit is placed next to the record player, etc., the howling noise may be heard. In this case, place this unit apart from the record player, etc.

·Because the low frequencies produced by this subwoofer are non-directional, the placement of this unit is not critical,. Place this unit by a wall or corner of the room, etc. as desired.

3