5-8 Voltage Adjusting Dial
Adjust the dial whenever the AC Output adjustment is necessary. Set the dial in the
center usually.
<Caution>
z When raising the voltage, the current is decreasing. (Use the output within the
output capacity.)
z In you raise the voltage exceeding the allowable voltage range, which causes
the damage to the loads. (Especially using the output terminals connected to
the 1-P loads.
6. Initialization and Pre-check
Caution : Fire Burns Injuries
z When checking engine, always stop the engine, and keep away from fire. Wait
until the engine cools down, before performing any checks.
6-1 Checking Engine Oil
When checking for engine oil, be sure to keep the equipment leveled, and insert
the oil gauge all the way in.
Prior to starting the equipment, make sure to fill the engine oil to the UPPER line
through the oil inlet.
<Caution>
z If the equipment is not leveled, you cannot obtain accurate oil level.
Do not overfill (over UPPER line) the engine oil. The excessive amount of
engine oil may damage the engine (inside the cylinders)
- 14 -