General Safety Instructions
Work Safely
Blowers operate at a very high speed and can do serious damage or injury if they are misused or abused. Never allow a per-
son without training or instruction to operate your Blower!
Stay Alert
You must be physically and mentally fit
to operate this unit safely.
WARNING!
Never make unauthorized modifications or attachment instal- lations. Never use attachments not approved by Shindaiwa for use on this unit.
IMPORTANT!
This engine is equipped with a heat sensor in order to prevent the engine from over- heating. If the sensor is activated, engine speed will be reduced to 5,000 (RPM). If the engine speed is automatically reduced, please cool the engine as described in the section "Using the Blower".
WARNING!
Never operate 
power equipment of any kind if you are tired or if you are under the influ- ence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.
WARNING!
Minimize the Risk of Fire
NEVER smoke or light fires near the unit.
ALWAYS stop the engine and allow it to cool before refuelling. Avoid overfill- ing and wipe off any fuel that may have spilled.
ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.
If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.
ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.
NEVER place flammable material close to the engine muffler.
NEVER run the engine without the spark arrester screen in place.
WARNING!
Use Good Judgment
ALWAYS wear eye protection that complies with ANSI Z 87.1 or your applicable national standard to shield against
thrown objects.
NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause seri-
ous injury or death.
ALWAYS stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improperly installed parts.
ALWAYS keep the unit as clean as practical. Keep it free of loose vegetation, mud, etc. ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire before performing any maintenance work.
ALWAYS turn off the engine before putting the unit down. When transporting the unit in a vehicle, properly secure it to prevent the unit from over turning, fuel spillage and damage to the unit.
NEVER insert any foreign objects into the air intake or outlet opening of the blower while in operation.
3
