Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a con- tainer approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

WARNING!

The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that could cause loss of control.

WARNING!

Never start the engine from the operating position.

1.Slide the ignition switch to the “ON” position.

2.Set the throttle trigger to the “fast idle”:

a.Squeeze the throttle trigger toward the handgrip on the shaft tube.

b.Depress and hold the throttle lock button.

c.While depressing the throttle lock button, release the throttle trigger.

3.Press the primer bulb until fuel can be seen flowing in the trans- parent return tube.

IMPORTANT!

The primer system only pushes fuel through the carburetor. Repeatedly pressing the primer bulb will not flood the engine with fuel.

Throttle Lock

Ignition

switch

Button

 

ON

Throttle trigger

Throttle interlock

Slide ignition to ON

Close choke

Set the choke lever to the CLOSED position

Primer Bulb

Press primer bulb...

Hold

the unit

firmly...

...and pull recoil

Make sure the

attachment is clear

starter handle

of obstructions!

upward

 

12

Page 11 Page 13
Page 12
Image 12
Shindaiwa X7502831700, C344 manual Filling the fuel tank, Starting the Engine, Minimize the Risk of Fire
Page 11 Page 13

C344, X7502831700 specifications

The Shindaiwa X7502831700, C344 is an exceptional piece of equipment designed for landscaping and forestry professionals who demand reliability and performance. This product is part of Shindaiwa's broad portfolio of high-quality outdoor power tools. It stands out for its robust construction, efficient design, and a range of features that enhance usability and effectiveness.

One of the key features of the X7502831700 is its powerful engine, which provides ample torque and power for various applications, from trimming hedges to tackling thick brush. The engine is engineered for efficiency, ensuring that users can complete their tasks without frequent refueling. This not only saves time but also reduces operational costs, making it an ideal choice for professionals who work long hours.

The C344 model incorporates advanced vibration dampening technology. This is crucial for extended use, as it minimizes operator fatigue and maximizes comfort. The ergonomic design of the handle also promotes ease of use, allowing users to maneuver the equipment efficiently without strain. This attention to user experience enhances productivity on the job site.

Additionally, the Shindaiwa X7502831700 comes equipped with a high-quality cutting system that ensures precision and clean cuts. The materials used in the construction of the cutting components are durable, designed to withstand the rigors of tough outdoor conditions. This resilience translates to a longer lifespan for the equipment, which is a significant consideration for anyone investing in professional-grade tools.

Safety features are another highlight of the C344 model. It includes an easy-start system that reduces the effort required to start the engine, along with protective guards that enhance safety during operation. These features help ensure that users can focus on their tasks with peace of mind.

In conclusion, the Shindaiwa X7502831700, C344 is a powerful and reliable tool that meets the needs of demanding professionals in landscaping and forestry. With its robust engine, ergonomic design, advanced vibration dampening technology, and high-quality cutting system, it stands out as a preferred choice for those seeking performance and durability in their outdoor power tools. Whether you are a professional landscaper or a serious hobbyist, the C344 can help you achieve outstanding results in your outdoor projects.
Top Page Image Contents