Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury

may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut- off containers to reduce fuel spillage.

After use

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building,

away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

■■DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immedi- ately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

9

Page 8 Page 10
Page 9
Image 9
Shindaiwa X7502891100 manual Filling the fuel tank, Handling Fuel, After use, Minimize the Risk of Fire
Page 8 Page 10

X7502891100 specifications

The Shindaiwa X7502891100 is a powerful and versatile tool designed to meet the needs of landscape professionals and avid gardeners alike. This innovative equipment is known for its robust performance, exceptional build quality, and advanced features that enhance productivity and ease of use.

One of the standout characteristics of the Shindaiwa X7502891100 is its highly efficient engine. The unit is powered by a reliable two-stroke engine that delivers impressive torque and power to tackle even the toughest tasks in the garden or landscape. This engine technology is designed for optimal fuel efficiency, allowing operators to work longer with less frequent refueling. Furthermore, the engine complies with stringent emission regulations, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The design of the X7502891100 incorporates a lightweight frame, which promotes easy maneuverability and reduces operator fatigue during extended use. The ergonomic handle is another key feature that adds to user comfort and control. It is designed to minimize vibrations, ensuring a smoother operation that significantly enhances user experience.

Shindaiwa's proprietary technology is also evident in the X7502891100, which includes advanced air filtration systems. This technology ensures that the engine receives clean air, thereby extending the lifespan of the equipment and reducing maintenance costs. The tool is engineered for durability, with high-quality materials that can withstand the rigors of outdoor work.

Another impressive feature is the user-friendly starting system, which makes it easy for both experienced and novice operators to start the engine with minimal effort. This convenience is complemented by the tool's versatility, as it is compatible with a range of attachments that allow it to perform various tasks such as trimming, edging, and blowing.

In conclusion, the Shindaiwa X7502891100 stands out in the market for its combination of power, efficiency, and user-friendly features. Its advanced engine technology, ergonomic design, and durable construction make it an excellent investment for anyone looking to enhance their landscaping or gardening capabilities. Whether you are a professional landscaper or a dedicated hobbyist, the X7502891100 is engineered to deliver top-notch performance and reliability.
Top Page Image Contents