Shindaiwa X7502891100 manual Work Safely, Stay Alert, Use Good Judgement, Safety Labels

Safety

Work Safely	WARNING!	WARNING!
A PowerBroom operates at very high
	Never make unauthorized	Never operate
speeds and has the potential to do serious
	attachment installations.	power equipment of any kind if
damage if misused, abused or mishan-
		you are tired or if you are under
dled. To reduce the risk of injury, you must
	Stay Alert	the influence of alcohol, drugs,
maintain control at all times, and observe
all safety precautions during operation.	You must be physically and mentally fit	medication or any other substance
		that could affect your ability or
Never permit a person without training or	to operate this unit safely.
		judgement.
instruction to operate this machine!
	WARNING!
	Use Good Judgement

■■Sweeper belts may move when starting engine. Place sweeper belts on a smooth level surface when starting.

■■Always make sure the Power- Broom attachment is properly installed and firmly tightened before operation.

■■Always wear eye protection to shield against thrown objects.

■■Never modify or disable any of the unit’s safety devices.

■■Do not make unauthorized modifi- cations to this unit.

■■Make sure there are no missing or loose fasteners, and that the igni- tion switch and throttle controls are working properly.

■■Do not operate the unit with the muffler removed.

■■NEVER operate this unit indoors. Operate this unit only in a well ven- tilated area. Be aware of carbon monoxide poisoning. Exhaust gases and lubrication oil mist can cause serious injury or death.

■■Always hold the machine firmly with both hands when sweeping, and maintain control at all times.

■■Always stop the engine immediately and check for damage if you strike a foreign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

■■Always clear your work area of trash or hidden debris to help ensure good footing.

■■Always use genuine Shindaiwa parts and accessories when repair- ing or maintaining this unit.

■■Stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, miss- ing or improperly installed parts or attachments.

■■Never transport the unit nor set it down with the engine running. An engine that’s running could be accidentally accelerated causing the drum assemblies to rotate.

■■Always disconnect the spark plug wire before performing any main- tenance work.

■■Always maintain this unit accord- ing to this owner’s manual and fol- low the recommended scheduled maintenance.

■■Keep a Solid Stance. Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Safety Labels

READ THE

OPERATOR’S MANUAL.

WEAR HEARING AND ANSI Z87.1

APPROVED EYE PROTECTION.

BEWARE OF THROWN

DIRT AND DEBRIS.

DO NOT USE ON UNGUARDED

ELEVATED SURFACES.

MAINTAIN A

SHALLOW

WORKING

ANGLE…

…AVOID MOVING TOWARD

VERTICAL.

Shindaiwa Inc. 80267

This label indicates the minimum distance between

front handle and rear grip per ANSI B175.3.

HOT SURFACE

IMPORTANT!

Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing informa- tion labels. New labels are available from your local authorized Shindaiwa dealer.

3