Shoprider ISO9001, ISO13485, ISO14001 manual Trouble Shooting, Battery Gauge Possible Fault

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED

TROUBLE SHOOTING

The Self-Help Guide (Table 1) is intended to assist in the location of a fault that may occur in a certain part of the Powerchair.

If after checking out the fault from the table below and the fault is still showing, do not use the Powerchair. Turn off the power and consult your provider immediately.

		Table 1
BATTERY GAUGE		POSSIBLE FAULT
10 Bars flash		Battery voltage is too high. Check the battery connections.
9	Bars flash	Solenoid brake fault. Check free wheel levers.
8	Bars flash	Possible joystick controller fault.
7	Bars flash	Possible joystick fault.
6	Bars flash	Battery charger connected.
5	Bars flash	Right-hand motor wiring fault.
4	Bars flash	Right-hand motor disconnected.
3	Bars flash	Left-hand motor wiring fault.
2	Bars flash	Left-hand motor disconnected.
1	Bar flashes	Low battery voltage.

~24~