Shoprider Dasher 3, Start 3, Dasher 4 manual Starting to Drive Your Scooter

Models: Dasher 3 Start 3 Dasher 4

1 20
Download 20 pages 4.68 Kb
Page 13
Image 13

STARTING TO DRIVE YOUR SCOOTER

First Time Use

Prior to using your Dasher/Start Portable scooter for the first time, you must charge the batteries fully (refer to Battery Charging Procedures). Charging may take up to 12 hours. Charging the batteries completely prior to first time use will benefit battery efficiency. Failure to do so may cause permanent damage.

Getting Started

Select a level area with plenty of space.

Mount the scooter by pushing the arm upward out of the way and sliding onto the seat or swivel the seat around to mount. Use the arm rest for support if necessary.

Adjust the tiller and seat as previously described.

Starting Scooter Movement

Ensure that you are seated in a comfortable position.

Turn the key to the on position.

Your speed setting should be on or near the turtle (slow).

Push your right thumb lever (yellow) and the scooter will move forward slowly. The harder you push, the faster the scooter goes but will only reach the speed level that has been selected.

Release the lever and the scooter will slowly come to a stop as the magnetic brake automatically engages.

Steering

Steering the scooter is light and easy. When starting off ensure that you give a wide clearance when turning so that the rear wheels clear any obstacle that you are passing. When steering through limited spaces such as a doorway or when turning around, turn the tiller handles where you want to go and apply power gently. The scooter will turn very tightly, but will still move with complete stability as long as the speed is not too high.

Reversing

Before reversing ensure that the area behind is free from any hazards or obstructions. Adjust your speed setting to a low setting before you move in reverse. Push your left thumb lever (black), and steer wide of all corners and obstacles.

Dismounting

Before dismounting ensure that the key is turned to the off position.

Dismount the scooter by pushing the arm upward out of the way and sliding off the seat or swivel the seat around to dismount. Use the arm rest for support if necessary.

CAUTION: Please ensure that care is exercised when mounting or dismounting the scooter and that the tiller and foot rest is not used for support.

12/8/200613

Page 13
Image 13
Shoprider Dasher 3, Start 3, Dasher 4 manual Starting to Drive Your Scooter