![](/images/new-backgrounds/1137760/13776029x1.webp)
TRANSPORT / STORAGE
The Dasher/Start Portable scooter is designed to be quickly and easily disassembled into sections for transportation and storage. Follow these simple guidelines for disassembly:
Dasher/Start Disassembly (Fig 11 & 12) |
| ||
1) | Remove the front basket: Lift basket up and |
| |
| off. | 2 | |
2) | Fold the seat down and remove: Pull yellow | ||
| |||
3) | swivel seat lever up and lift seat up and off. | 4 | |
Remove battery pack: Lift battery pack up and |
| ||
| off using handle (Note: battery pack is secured |
| |
| by Velcro). | 1 | |
4) | Fold tiller down and lock into place: Loosen | 5 | |
|
tiller adjustment knob, lower tiller, and tighten
adjustment knob. Lock tiller assembly by | 3 |
| |
pulling yellow lever up and to the right. |
|
5)Detach rear section from front section: Detach lever (yellow) is located in the rear of the
scooter next to the freewheel lever. Slide lever
to “detach” and separate rear section from frontFigure 11 section.
2
4
1
5
3
Figure 12
12/8/200615