Seat Height Adjustment (Fig 5)
Remove seat as described (fig 4). Loosen the lower hand knob and remove seat post. The seat height can be adjusted to two different settings by inserting the steel locking pin in the desired hole. Replace the seat post, tighten the lower hand knob and replace the seat. Tighten the seat knob.
Armrest Width Adjustments (Fig 6)
On the underside back of the seat there are two arm rest hand knobs, one on each side. Turn hand knobs counterclockwise to loosen. Loosening the arm rest hand knob allows the armrest width to be adjusted or arm rest to be removed. Once the desired positions of the arm rests are set, tighten the hand knobs by turning clockwise to lock the arm rests into place.
Armrest Adjustments (Fig 6)
The arm rests are hinged at the bottom and can be pushed down and out of the way for sideways transfer. Pull arm rest up the push arm rest forward and down.
Seat |
| Lower |
Post |
| Hand |
|
| Knob |
|
| |
|
|
|
Adjustment
Holes
Steel
Locking
Pin
Figure 5
1) Pull Up
2) Push Forward
& Down
Arm Rest
Hand Knob
Figure 6
8/12/2004 | 8 |
