Shure 27C3115 manual USING THE BETA 53 IN HARDWIRED APPLICATIONS

ENGLISH

USING THE BETA 53 IN HARDWIRED APPLICATIONS

An in-line preamplifier (Shure part no. RPM626) may be used with the Beta 53. This device requires phantom power ranging from 11 to 52 Vdc.

USING THE BETA 53 WITH OTHER BODYPACK TRANSMITTERS

If connecting the microphone to anything OTHER than a Shure wireless bodypack, make sure it provides a regulated +5 Vdc source (130 mA minimum) to the red con- ductor, as shown in Figure 1.

CONDENSER IMPEDANCE

CARTRIDGE CONVERTER

D+	RED	+5 Vdc (130 mA min.)
G		Audio Out
	BLK
S
	SHIELD

MICROPHONE WIRING DIAGRAM

FIGURE 1

USING THE BETA 53 WITH THE TA4F CONNECTOR

The following diagram shows how the Beta 53 is wired to the TA4F connector.

IMPEDANCE

CONVERTER

CONDENSER

CARTRIDGE

G	D	RED	+5 Vdc
			Audio Out
		BLK

S

1 3

SHIELD

4

2

TA4F (solder side view)

TA4F CONNECTOR WIRING DIAGRAM

FIGURE 2

4