Shure Conference Phone manual Power socket Remote socket, IntelliMix Link input, Audio output

2

Rear view

1 2 3 4 5 6 7 8

1	Power socket	5	Remote socket
	Socket with integrated fuse.		SUB-D 9 socket for external control
			systems such as Crestron + AMX.
2	Input level + Phantom power switch	6	AEC / TELCO AUDIO INTERFACE

Switches the audio input sensitivity between microphone and line level and adds phantom power for condenser microphones.

Balanced Audio Interface to connect an external phone hybrid or video conference system through 6-pin block connector terminal. The slider switches adjust audio levels to match connected device. Please note that the external device requires acoustic echo cancellation (AEC).

3Audio input (*)

Electronically balanced input via the combined XLR/1/4” jack socket and unbalanced input via dual female RCA connectors.

7IntelliMix® Link input

Socket for connection of a Shure SCM series automatic mixer. Please note that the audio signal only flows from the SCM series mixers into the ConferenceONE™ Discussion System and not from the Discussion System into the connected SCM series mixers.

4Audio output (*)

Electronically balanced output with XLR-socket or unbalanced output via dual female RCA connectors. The output carries a mixed signal of the discussion systems microphones, the audio input on the power supply and the signal from the AEC / Telco audio interface.

8Daisy chain sockets

SUB-D 25 sockets for connecting the consoles via Powerline cables and Floor-X adapters.

(*)Please note that the audio input and output are not suitableto connect to an external tele- phone hybrid. Please use the ACE / Telco Audio Interface for this purpose.

English 4