4
4 System Settings
All adjustments to the settings of the conference system are made on the chairman console. The controls located on the power supply unit adjust signal input and output for external devices.
4.1
Power Supply Unit
The slide switch beside the input socket on the rear of the power supply unit sets the sensitivity of the audio input between microphone level and line level. The third position of the switch provides 13 V Phantom power to a connected condenser microphone.
Press the ON/OFF button in the input section to activate the audio input on the rear of the unit. The LED above this button iluminates green when the input is active.
Use the UP and DOWN buttons to adjust the level of the audio input.
When a signal is present at the input, the "Signal" LED illuminates green. If the "Peak" LED illuminates red, reduce the input in order to avoid distortion.
Press the ON/OFF button in the output section to activate the audio output on the rear of the unit. The LED above this button illuminates green when the output is active.
Use the UP and DOWN buttons to adjust the audio output level to external devices.
9 | English |
