E2g
Sound Isolating Earphones
Sound isolating gaming earphones with Dynamic MicroDriver technology for
©2005, Shure Incorporated | Printed in U.S.A. |
27EN3205 (Rev. 1) |
|
WEARING THE EARPHONES
Two popular methods for wearing the earphones are illustrated below.
�
Over the ear
in back
Over the ear in front
Tighten the cable and take up slack by raising the cable sleeve .
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check the tightness of the seal between the earphone and your ear, or try one of the other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
left ear | right ear |
|
Make sure that the sleeve completely covers the earphone stem. If any part of the nozzle is exposed, the sleeve is not properly installed.
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you use is easy to insert into your ear, fits comfortably, and is easy to remove from your ear.
Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Foam Sleeves
When using the foam sleeves, compress the sleeve between your fingers before inserting it into the ear canal. Hold the earphone in place for about ten seconds while the foam expands and creates a tight seal.
WAX GUARD
You should place wax guards on the nozzle of your E2g earphones before using them. These protective rings are found on an adhesive strip in the fit kit that comes with your earphones.
To place a wax guard on one of your E2g earphones:
1.Remove the sleeve from the earphone nozzle.
2.If there is a dirty wax guard on the earphone, peel it off.
3.Clean the tip of the E2g nozzle with an antiseptic or alcohol wipe.
4.Make sure that the tip of the nozzle is dry, then remove a wax guard from the supplied strip and place it on the tip of the nozzle, adhesive side down.
5.Replace the sleeve on the earphone.
Wax Guard
Stem
IMPORTANT: Do not place wax guards on sleeves! Wax guards are intended for use on the tip of the earphone nozzle only. If wax guards are placed on sleeves they will not function properly and may fall off the sleeves into your ears.
FULL TWO YEAR WARRANTY
Shure Incorporated (“Shure”) hereby warrants that this product will be free from defects in materials and workmanship for a period of two years from the date of purchase. At its option Shure will repair or replace the defective product and promptly return it to you, or refund the purchase price. You should retain proof of purchase to validate the purchase date and return it with any warranty claim.
If you believe this product is defective within the warranty period, carefully repack the unit, insure it, and return it postage prepaid to:
Shure Incorporated
5800 W. Touhy Ave.
Niles, IL
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL
Phone:
Shure Europe GmbH, Phone:
Shure Asia Limited, Phone:
