![SAFE USE](/images/new-backgrounds/13636/136363x1.webp)
SAFE USE
Use a slow twisting motion to remove the earphones. Never pull on the earphone cord.
Warning: If a sleeve becomes lodged in your ear, seek skilled
medical assistance to remove the sleeve. Damage to the ear may be caused by
Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle.
Turn up the volume control only far enough to hear properly.
Ringing in the ears may indicate that the volume level is too high. Try lowering the volume.
If you connect these earphones to an airplane’s sound system,
listen at low levels so that loud messages from the pilot do not cause discomfort.
Have your ears checked by an audiologist on a regular basis. If
you experience wax buildup, discontinue use until an audiologist has examined your ears.
Stop using the earphones if they are causing great discomfort or infection.
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
Ask a Hearing Health Care Professional about creating custom molded sleeves for your earphones. For more information, contact:
Sensaphonics Hearing Conservation | Toll Free: (877) |
660 N. Milwaukee Avenue | In Chicago: (312) |
Chicago, IL 60622 |
|
FURNISHED ACCESSORIES
Carrying pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95A2232 Fit Kit w/wax guards . . . . . . . . . . . . . . . . . . . . . . . . . 90XH1371
REPLACEMENT PARTS
Bag of 10 foam sleeves | (small) | PA752S |
| (medium) | PA752M |
| (large) | PA752L |
Bag of 100 foam sleeves | (small) | PA753S |
| (medium) | PA753M |
| (large) | PA753L |
Bag of 10 flex sleeves | (small) | PA757S |
| (medium) | PA757M |
| (large) | PA757L |
Bag of 10 replacement wax guards | PA759 |
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
Do not expose earphones to extreme temperatures.
Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2) environments.
TECHNICAL SPECIFICATIONS
Transducer type | Dynamic |
Sensitivity (at 1kHz) | 105 dB SPL/mW |
Impedance (at 1kHz) | 16 Ω |
Output connector | |
Net weight | 30 g (1 oz) |