Shure P4R manual Battery Installation, Lcd Screen, English

ENGLISH

BATTERY INSTALLATION

1.Open the battery compartment door by pushing down and sliding towards

antenna.

2. Insert a fresh 9V alkaline battery with the +/– terminals properly positioned (see Figure 2).

3. Close the battery compartment door.

NOTE: If battery compartment door will not close, the battery is not properly inserted.

FIGURE 2

LCD SCREEN

The LCD screen on the top panel displays the status of various functions. The status of these functions can be changed using the SCROLL and SELECT pushbuttons (see Pushbutton Controls on page 6).

2.Battery Life Meter: Indicates the approximate amount of voltage left in the battery. These volt- ages translate to time as follows:

FIGURE 3

1.RF: Indicates the P4R receiver is receiving a transmission. Always check for RF reception prior to inserting earphones into ears.

HIGH: 4-8 hours of operation.

MEDIUM: 1-4 hours of operation.

LOW: less than 1 hours of operation.

NOTE: If no bars are present within the battery life gauge, change the battery immediately. Battery life depends on many variables, including battery type (brand), earphones

WARNING! Turning the Limiter OFF defeats protection against hazardous sound levels!

4