ACOUSTIC GUITARS AND OTHER INSTRUMENTS
To mount the SM11 on an acoustic guitar (or similar instrument with a wide sound hole), proceed as follows.
1.Insert the clip blade (see Figure 1) in the slots of the shock mount.
2.Squeeze the clip to open it, and affix the clip to edge of the guitar sound hole (below the strings).
NOTE: The clip teeth are cushioned to avoid marring the instrument finish.
3.Snap the SM11 into the shock mount and swivel the micro- phone to the desired position (see Figure 4). Note that the microphone can be positioned on the top surface of the guitar as shown, or placed within the guitar body.
The SM11 can also be used with a number of other musical instruments. For instance, the clip can be affixed the bell of a saxophone, trumpet or trombone. Other uses depend on the availability of edges or surfaces to which the clip can be fastened.
CABLE CLIPS
To hold the microphone cable in place, remove the paper backing from the supplied cable clips, affix the clips to a suitable flat sur- face, and insert the cable in the clip slot.
GUITAR MOUNTING
FIGURE 4
REPLACEMENT PARTS
Expansion Mount | 90B2739 |
Cloth Mounting Adapter | 95A961 |
Shock Mount and Clip | 90A3645 |
Rubber Bushing, 4 mm | 66A161 |
Rubber Bushing, 4.37 mm | 66B161 |
Rubber Bushing, 6 mm | 66C161 |
Cable Clip (each) | 80A291 |
Carrying/Storage Pouch | 29A1048 |
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL
Phone:
Shure Europe GmbH, Phone:
Shure Asia Limited, Phone:
2
