BASIC MIXER OPERATION

1.Adjust each channel level so that its Overload LED flickers only during very loud speech or noise.

2.Adjust the Low-Cut and High-Frequency controls adjacent to each Input Gain control so that the microphones sound

similar.

3.Adjust the Master level control for the required output level, as indicated by the output peak meter. The SCM410 is now

ready for use.

NOTE: The sensitivity of the Intellimix circuitry may allow some channel gating due to static discharge or electrical distur- bance to the power or signal lines. The unit will not be damaged; normal operation will resume after the disturbance ceases.

LIMITER

Output limiters prevent distortion during loud program peaks without affecting normal program levels. This keeps the de- vices connected to the SCM410 output from becoming over- loaded. Increasing individual or Master controls on the SCM410 increases average output and, in turn, the amount of limiting.

The limiter may be turned on via the rear panel DIP switch. The default limiter threshold is +16 dBu. As supplied, the limiter is defeated.

NOTE: Limiter thresholds can be changed from their factory settings. Refer to the INTERNAL MODIFICATIONS section.

EQUALIZER FUNCTIONS

Low Cut Filter (High-Pass)

Low-cut filters are used to reduce unwanted low frequency sounds such as footsteps, motorized traffic, and to control proximity effect. The SCM410 has a one-pole, low-cut (high- pass) filter of 6 dB per octave. The low-cut filter allows all fre- quencies above its cutoff point to pass through unchanged. Frequencies below the cutoff are attenuated (see Figure 16). The cutoff point is defined as the frequency where the signal has dropped 3 dB relative to the flat, or bandpass, region. Be- low the cutoff point, the filter exhibits increasingly more attenu- ation as the frequency diminishes.

+2

 

 

 

0

FULL CW

 

 

 

 

 

-2

 

 

 

-4

 

 

 

-6

 

 

 

AMPLITUDE (dB)

50%

FULL CCW

 

-8

 

 

-10

ROTATION

 

 

 

 

 

20

100

1,000

5,000

FREQUENCY (Hz)

LOW-CUT FILTER EFFECTS

FIGURE 16

High-Frequency Shelving

The fixed-frequency equalizer produces a 6 dB boost or cut at 5 kHz and above (see Figure 17). High-frequency shelving is extremely useful for boosting flat frequency response and tempering sibilant vocal microphones or enhancing the sound of off-axis lavalier microphones.

+10

 

 

FULL

 

 

 

+8

 

 

CW

+6

 

 

 

+4

 

 

 

+2

 

 

50%

0

 

 

 

 

ROTATE

-2

 

 

 

AMPLITUDE (dB)

 

 

 

-4

 

 

 

-6

 

 

 

-8

 

 

FULL

-10

 

 

CCW

 

 

 

200

1,000

10,000

20,000

FREQUENCY (Hz)

HIGH-FREQUENCY SHELVING EFFECTS

FIGURE 17

8

Page 8
Image 8
Shure SCM410 manual Basic Mixer Operation, Limiter, Equalizer Functions, Low Cut Filter High-Pass, High-Frequency Shelving

SCM410E, SCM410 specifications

The Shure SCM410 and SCM410E are state-of-the-art automatic microphone mixers designed to enhance audio performance in various professional environments. Known for their reliability and advanced features, these mixers are a popular choice for broadcasters, conferencing systems, and live event productions.

One of the key features of the SCM410 is its Automatic Gain Control (AGC) system, which intelligently adjusts the gain of connected microphones based on their audio levels. This ensures that the output remains consistent, making it ideal for situations where multiple speakers might share the microphone, such as panel discussions or meetings. The SCM410E variant further enhances this functionality with extended connectivity options, catering to more complex audio setups.

Both models incorporate Shure's exclusive IntelliMix technology. IntelliMix employs sophisticated algorithms to minimize interference and eliminate feedback, which is crucial for maintaining intelligibility in crowded sound environments. The mixers automatically manage the microphone levels, activating only those that are in use while suppressing those that are not, which not only enhances audio clarity but also helps in reducing background noise.

The SCM410 features four microphone inputs, allowing operators to connect multiple microphones simultaneously. Users can easily control each input's level, with individual gain adjustments and a master output level control. Additionally, LEDs provide visual feedback on the status of each microphone, indicating when they are active or inactive. The SCM410E goes a step further, offering additional mic input options and enhanced flexibility for integration into larger systems.

Durability is a hallmark of the SCM410 and SCM410E, as they are constructed with high-quality materials, designed to withstand the rigors of professional use. The intuitive interface makes them accessible for both novice users and seasoned sound engineers.

With a phantom power switch for condenser microphones, an easy-to-read, backlit display, and robust connectivity options, the SCM410 and SCM410E are versatile tools for any audio setup. Their ability to automatically mix and control audio levels in real-time ensures that users can deliver presentations, discussions, and performances with clarity and confidence. Whether it’s in a corporate boardroom or a live concert venue, these automatic microphone mixers deliver high-quality sound tailored to the needs of modern audio applications.