Shure UAPF-X1 manual Features, Application

General Description

The Shure UAPF-X1 is an in-line passive RF filter to attenuate frequencies outside the X1 band and intended to be used with any Shure X1 band wireless product that has removable antennas, including SLX, ULX, and UHFR.

FEATURES

•Filters out extraneous RF signals.

•Mountable on supplied desk-/wall-mount or on a microphone stand

•Extremely durable under the heaviest use

•Shure quality, ruggedness, and reliability

Application

Optimally, the unit should be located prior to any amplification of an RF signal. Positioning should be tested and adjusted for each individual setup.

Antennas should be spaced far enough to obtain the widest possible RF field and to minimize RF signal drop out. In a diversity system, Shure recommends that antennas be positioned at 45°.

antenna B in		receiver outputs	networking	antenna A in
		200Ω
			network
	line	lift	activity
12.7V out			ethernet	12.7V out
	mic	GND
150mA			RJ-45	150mA

45 45

Figure 1. Diversity System

The following table shows three typical connectivity arrangements for the UAPF-X1:

Antenna	Passive	In line	Antenna	Receiver
	Filter	Amplifier	Distribution
			Unit
UA820X (or	UAPF-X1			UR4D-X1 (or
PA805SWB,				UA4S-X1)
UA860SWB,
PA805X)
UA820X (or	UAPF-X1		UA845-SWB	UR4D-X1 (or
PA805SWB,				UA4S-X1)
UA860SWB,
PA805X)
UA820X (or	UAPF-X1	UA830X	UA845-SWB	UR4D-X1 (or
PA805SWB,				UA4S-X1)
UA860SWB,
PA805X)

3