Shure UAPF-X1 manual Specifications, Maintaining cable integrity, Replacement Parts

Maintaining cable integrity

To maintain Shure cables in top condition in permanent installations:

1.Avoid sharp bends or kinks in the cables.

2.Do not deform cables with makeshift clamps, such as bending a nail over the cable.

3.Do not use cables in permanent outdoor installations.

4.Do not expose cables to extreme moisture

Figure 4: Cable Chaining
SPECIFICATIONS
RF frequency range	3dB bandwidth = 36Mhz
..............................	20dB bandwidth = 49Mhz
Stop-Band Attenuation:	Minimum 30dB, Typical 32-36dB
Insertion Loss	Typical 3.25dB
Case	Aluminum die-casting, black painted
VSWR in pass-band (input, output):	Typical 2.0dB
Swivel Adapter	Positive action, break-resistant
	adjustable from 0 degrees to 90 degrees,
	with standard 5/8 in. –27 thread
Net Weight	Without mounting stand.28kg (9.8 oz)
.......................................................................	With mounting stand .42 kg (14.8 oz)
Power Consumption (12 Vdc)	Passively passes power (12Vdc) 0.6 to 0.72 W
	for use with UA870X active antenna.
Connectors	Female, BNC-type
Dimensions (without accessories)	66.7 mm high x 31.75 mm wide x 112 mm
	deep (2.625 x 1.250 x4.40 inches), 108 mm
	(4.25 in.) high w/mounting stand
REPLACEMENT PARTS
Mounting Base	A13HDB

For additional service or parts information, please contact Shure’s Service department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.

5