External outgoing calls
25
kap06.fm5
18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Manually inserting a pause
If you repeatedly get the busy symbol following automat-
ic dialling from the telephone directory, e.g. after the
country code, you can enter a pause (three seconds), e.g.
between the exchange or country code and the call
number:
No answer or line busyRedial
Repeating the last number dialled
Redialling one of the last five numbers selected
Your Gigaset 2010 Tango memorises the last five num-
bers dialled. You can dial these five numbers without
having to re-enter them or you can correct them with
theQkey.
o O oPress the O key. “P“ is shown on the display.
:
0043P123456
f
N
bF
Replace the handset in the base station or charging unit.
The call is disconnected.
or
aDisconnect call (“on-hook“).
You can use the redial function to repeat this
call.
cPress the off-hook key. You will hear the dial tone.
OThe last number dialled will be redialled. You will hear the
ring tone.
OKeep pressing the key until the required number appears
on the display of the mobile unit.
QPress the Q key to correct the number if necessary.
cThe number is dialled. Ringing tone is then heard.